Aston Martin has built a special-edition V12 Vantage RS Concept car capable of going 0-100 km/h in 4.0 seconds, the company announced yesterday. Unveiled at the opening of their design center in Gaydon, Aston CEO Ulrich Bez told onlookers the 600 horsepower concept car reaches 160 kmh in about 8.5 seconds. Peak horsepower is achieved at 6250rpm, while 509 ft-lb of torque (690Nm) comes at 5000rpm.The past two days has brought us a great deal of news from Aston Martin. After opening their new design center, they forged a partnership with Danish luxe electronics maker Bang & Olufsen. Capping off the news was the announcement that the DBS will remain as James Bond's car of choice in next November's latest Bond film.
This new V12 Vantage RS concept has a power-to-weight ratio of 375 horsepower per ton, with all the power coming from their 6.0 liter V12 engine. Based on the V8 Vantage coupe, Bez told his audience that Aston plans to continue building models like the RS concept to appeal to the demands of their customers and fan base.
“With our dedicated production facilities, our own engine plant, our own unique vehicle architecture and now a dedicated design studio, we have the ideal framework to bring new models such as this to market and to further establish Aston Martin as the ultimate independent luxury sports car company,” Bez said.
Taking some cues from the DBS, a carbon fibre bonnet and trunk lid have helped bring the weight of this vehicle down below 1600 kg. The company has included an automatic, deployable spoiler to increase rear down force at high speeds. Incorporated into the front bumper are cooling ducts for the carbon ceramic brakes, as well as a carbon fibre splitter to help balance down force.
Aston Martin's latest advanced-stage concept also has "a dry sump lubrication system, tuned length exhaust manifolds, forged pistons and steel con-rods, revised lift and duration camshafts and modified cylinder heads," according to a press release.
No mention of top speed was made, but rumor has it could be over 200 mph.
We full well expect to see the public unveiling of the Aston Martin V12 Vantage RS on the 2008 auto show circuit, beginning this January in Detroit.
Press Release
Aston Martin Unveils New Performance Concept Car
At the official opening of Aston Martin’s first ever dedicated design centre in Gaydon, Warwickshire, on Tuesday 11 December, Dr Ulrich Bez, Chief Executive Officer, thrilled an audience of more than seven hundred VIP guests with a surprise unveiling of a stunning new 600bhp performance concept car; the V12 Vantage RS.
The V12 Vantage RS concept is based on Aston Martin’s critically acclaimed V8 Vantage coupe, but the company’s design and engineering team have fully exploited the design flexibility of their unique VH architecture and the motor sport development of their 6.0 litre V12 engine to create a dramatic and production feasible concept car focussed on extreme performance and dynamics.
In a speech to the assembled guests, Ulrich Bez said: “Over the last five years, we have established a reputation for presenting fully functional, feasible concept cars, and the V12 Vantage RS is no exception. We will listen with interest to feedback on this concept and, as ever, if there is sufficient demand then we will seriously consider a low volume production run in the near future with a price that will reflect the exclusivity of the car.
“With our dedicated production facilities, our own engine plant, our own unique vehicle architecture and now a dedicated design studio, we have the ideal framework to bring new models such as this to market and to further establish Aston Martin as the ultimate independent luxury sports car company.”
Although the 600bhp power output of the V12 Vantage RS concept will be the focus of attention, just as significant is the level of weight reduction achieved by Aston Martin’s engineering team. With a kerb weight of less than 1600kg, the RS concept underlines Aston Martin’s continued commitment to intelligent use of materials and weight reduction as a means of achieving improved efficiency and performance. In common with the recently launched DBS, the bonnet and trunk lid are moulded in carbon fibre and the concept also adopts motor sport-inspired carbon ceramic brake discs.
The subtly aggressive exterior appearance is driven by function. The dramatic bonnet louvres extract air from the fully ducted cooling pack and the trunk lid features a deployable spoiler that rises automatically at high speeds to increase rear down force. The front bumper features cooling ducts for the carbon ceramic brakes and a carbon fibre splitter to balance down force.
Director of Design, Marek Reichman, commented: “Much of Aston Martin’s recent success has come from the ability of our designers and engineers to work hand-in-hand to optimise form and function. Our new dedicated design centre will take this process to a new level and I am delighted that the V12 Vantage RS is the first car to stand on the turntable in the studio.”
The 600bhp 6.0 litre engine featured in the V12 Vantage RS concept has benefited directly from the race development of this acclaimed power unit. It features a dry sump lubrication system, tuned length exhaust manifolds, forged pistons and steel con-rods, revised lift and duration camshafts and modified cylinder heads. Peak power is achieved at 6250rpm and peak torque of 690Nm is at 5000rpm.
With a power-to-weight ratio of over 375bhp per ton, the V12 Vantage RS concept is the fastest accelerating road car ever built by the company, capable of reaching 62mph (100km/h) from rest in 4.0 seconds and 100mph (160km/h) in just 8.5 seconds.
The unveiling of the Aston Martin V12 Vantage RS concept concludes a remarkable year of new product announcements for the British manufacturer. In the last twelve months the company has launched two of the most eagerly anticipated sports cars of the year – the DBS and Vantage Roadster – and announced details of the DB9 LM and V8 Vantage N400 special editions which celebrate the company’s racing successes at Le Mans and the N?rburgring. All of these models now join the award-winning V8 Vantage, DB9 and DB9 Volante models in production at the company’s Gaydon headquarters.
